Hatchway Limit Switch - Type LS
The switch is made of cast iron, entirely enclosed, and of very heavy construction. The finish is gray. The roller is of rubber with a bronze bushing and noiseless tread.
The contacts are of the compression spring operated finger type, mounted on canvas Bakelite and made of compositions known to give the best results.
The switch is comparatively low and can be used where space is limited. An inlet is provided for 1/2-inch conduit and it is arranged to make wiring easy.
Double Throw Limit Switch - Type LTD
Type LTS (Single Normally Closed Contact Only)
and Type LTD (One Normally Open and One Normally Closed Contact)
This heavily constructed switch has a cast iron housing, steel cover, bronze roller arm and rubber roller with noiseless tread. It is entirely enclosed and finished in gray. It can be used as a normally closed or normally open limit switch, also in cases where one contact has to be broken and another one established at the same time.
It has two sets of copper contact terminals mounted on canvas Bakelite, which are bridged by a self-aligning composition bar giving a positive wipe in making and breaking the circuit. With this arrangement, springs and braids are eliminated in the electrical circuit and satisfactory service is assured.
This hatchway limit switch is relatively small and can be used where space is limited. Its roller arm is reversible rendering it applicable for either right or left hand installation. An inlet is provided for 1/2" conduit. The contact base slides out of the casing for easy and rapid wiring.
|Type LTD Limit Switch||Type LTS Limit Switch|